LED Connectors for 10mm RGB 5050 LED Strips, 10 Pack with Extension Cable

These UPGRADE DESIGN strip to wire connectors are the solution for all your 10mm 5050 5630 RGB LED light strip connection and extension needs. With these connectors, you can easily create DIY extensions of your desired wire length to connect your LED light strips.

Please note that these connectors are compatible with 10mm width 4-pin RGB LED light strips, suitable for both waterproof and non-waterproof varieties. Ensure that your wire diameter is within the 20AWG-22AWG / 0.34~0.75 mm2 range, and no wire stripping is required.

To install the connectors, first prepare your LED light strip. Ensure that the strip is 10mm wide and has 4 contacts (+, B, R, G). Clean all the contacts and cut the strip straight. Open the transparent cover of the connector up to 45 degrees. Peel off the 3M tape around the cutting line area on the back of the LED strip, then insert the strip into the strip side of the connector, making sure the 4 contacts on the strip align with the 4 pins of the clasp. Close the clasp down firmly with pliers.

For the wire end, cut the desired wire length and separate the 4 wires (20-22AWG) around the connection part. Insert the wires into the connector guide slot, making sure the positive and negative wires on the strip light surface correspond to the correct wires. Close the transparent cap with pliers until it is fully seated on both sides of the bottom base. Ensure that the metal joint pierces through the wire insulation.

No wire stripping is required, as the positive wire is matched to the "+" input power mark on the strip light surface.

These connectors are designed to work with a variety of LED strip light power sources, including 5V, 12V, and 24V. They can support up to 5A (R, G, B 3-channel) current carrying, allowing you to connect longer LED strips using a single connector.

The package includes 10 strip-to-wire crystal connectors for 10mm width RGB LED strips, both waterproof and non-waterproof, as well as a 16.4ft 22-gauge 4-conductor extension cable.

The high-quality PVC plastic wire cover and tin-plated copper core ensure a steady, safe, and long-lasting connection. The fire-proof nylon housing and high-precision brass connector are durable and powerful, firmly biting through the LED light strip for a much stronger connection compared to older-style connectors.

These connectors are the perfect solution for all your LED strip light connection and extension needs, offering a quick, flexible, and hassle-free way to create custom setups without the need for soldering or peeling off waterproof covers.

product information: