SUPERNIGHT 10-Pack 4-Pin LED Connector for Waterproof 10mm RGB 5050 LED Strips, Quick Connection

These NEWEST DESIGN strip to wire connectors are a solution for the waterproof connection and extension needs of 10mm 5050 5630 RGB LED light strips. They enable DIY extension to whatever wire length you desire to connect.

Make sure your LED light strip is a 10mm width, 4-pin, IP65 WATERPROOF RGB strip light. These connectors will not work with non-waterproof or 8mm width LED strip lights. Ensure your Wire Diameter is within the range of 20AWG-22AWG /0.34~0.75 mm2 and without the need for stripping the wire.

The Installation Guides are as follows:

Strip End: - Ensure your LED light strip is waterproof, 10mm width, and has 4 contacts (+, B, R, G). All contacts should be clean, and the strip should be cut straight. - Open the transparent cover of the connector up to 90 degrees. - Peel off the 3M tape around the cutting line area on the back of the LED strip, then insert the waterproof LED light strip into the clasp side, with the 4 contacts of the LED strip sitting on the 4 pins of the clasp. (Note: No need to peel off the silicone on the surface of the LED strip around the soldering line area) - Close the clasp down with force using pliers.

Wire End: - Cut the desired wire length you need and separate the 4 wires (20-22AWG) around the connection part. - Insert the wires into the connector guide slot, ensuring that the positive and negative on the strip light surface correspond to the correct wires. - Close the transparent cap with pliers until it is fully seated on both sides of the bottom base. Ensure the metal joint pierces through the wire insulation. (Note: No stripping wires. Positive wire is matched to "+" input power mark on the strip light surface)

The tools needed are a pair of pliers.

The package includes: - 10x Strip to Wire Connectors for 10mm Width Waterproof RGB LED Strip - 1x 16.4ft 22 Gauge 4 Conductor Extension Cable

Other related products available: - 4 pin LED connectors without cable for 10mm non-waterproof strip - 4 pin LED connectors without cable for 10mm waterproof strip - 4 pin T-shape LED connectors

Customer reviews for these products range from 3.2 to 3.9 out of 5 stars, with quantities of 8-10 pcs per package.

The key features are: - Connect strip to wire without stripping insulation, no soldering, and no need to peel off the waterproof cover, enabling quick and flexible connection and saving 2/3 of the time. - Work for IP65 PU surface waterproof (not Silicone surface) 10mm width 5050 5630 RGB 4-pin strip light with 30-120 LEDs/Meter, suitable for 22-20 AWG Solid Wire / Strand Wire. - Compatible with 5V, 12V, 24V LED strips, supporting up to 5A (R, G, B 3 channel) current carrying, allowing you to connect longer LED strips with a single connector. - High-quality PVC plastic wire cover and tin-plated copper core ensure a steady, safe, and long-lasting connection; Fire-proof Nylon housing and high-precision brass connector are durable and powerful, firmly biting through the LED light strip, much stronger than old-style connectors.

product information: