Dual Output 44-Key IR Remote Controller for RGB 5050/3528 LED Strip Lights

The 44-Key LED Lights Controller allows you to easily control and customize your LED light strips. If the buttons don't control the right colors, you can follow these steps to resolve the issue:

1. Press the remote control switch button to turn off the light strip.
2. Then press the FADE7 button (the last button below the right) - the light strip will start flashing.
3. Press the switch button again to turn on the light strip, and the buttons should now control the correct colors.
4. If the issue persists, repeat the above steps until the buttons can control the right colors.

The controller offers a DIY setting function, allowing you to create your own unique color combinations:

Step 1: Activate the DIY function by turning on the light, pressing one of the RGB buttons, and then pressing the DIY1 button. Step 2: Adjust the red, green, and blue proportions by long-pressing the corresponding arrow buttons (5 seconds or more) to increase or decrease the color. Step 3: Save the color you've just set by pressing the DIY1 button again. The setting is now complete, and the current color will be saved. Step 4: Repeat the steps above to set the remaining 5 DIY buttons. All 6 DIY buttons are designed to be memory-based, so you don't need to reset them next time.

The package includes: - 1 x 44-Key Remote - 1 x 2-Port Output IR Receiver Box - 2 x 4-Pin Male Connector

The remote control is wireless and infrared, making it easy to control your LED RGB light strips. Before use, remember to remove the plastic cover from the bottom of the remote.

To connect the controller, simply attach the control box to the LED strip, ensuring the arrow marks between the control box and strip connector are aligned. Aim the remote at the IR receiver, and there should be no obstacles in between.

Press the DIY1 button to enter DIY mode, then use the Red, Green, and Blue arrow buttons to adjust the color as desired. After completing the color adjustment, press DIY1 again to save the setting.

The controller offers 20 static colors, brightness adjustment, and multiple modes: Static, Flash, Strobe, Fade-change, and RGB Smooth-change. It has 16 multicolored options and 5 light patterns, as well as 6 DIY keys that allow you to freely adjust the R/G/B color to suit your preferences.

The controller's output is DC 12V, 2A/Channel, with a 2-port 1-to-2 design, allowing you to connect two rolls of LED strip lights. It's suitable for 5050, 3528, and 2835 RGB LED strip lights with 4-pin connectors, and is compatible with all 12V DC LED power supplies.

product information: