Wireless RF Remote Control LED Strip Light Dimmer

Why Spightdex N12 LED RF Mini Dimmer?

The N12 single-color LED dimmer is designed to drive constant-voltage LED products in the voltage range of DC5-24V. The main unit works with an RF remote controller, allowing the user to adjust the LED brightness on the remote.

Remote Indicator This indicator blinks when the remote controller is working. If the indicator flashes slowly when pressing keys, it means the remote battery is nearly empty, and the battery should be changed. The battery model is CR2032.

Brightness Control Press the upward key to increase brightness, and press the downward key to decrease. The brightness will change smoothly when holding down these two keys. The controller applies brightness gamma correction on dimming control, making the brightness tuning smoother to the human eye.

Protection Function The main unit has full protection functions for wrong wiring, output short circuit, overload, and overheat. The controller will protect itself from damage in these extreme conditions and could automatically recover when the working condition is good. To avoid the protection, please ensure the LED fixtures are capable of constant-voltage driving and within the rated range, and the cables are well-connected and insulated.

Pair a New Remote Controller The remote controller and main unit are 1-to-1 paired by default. It's possible to pair up to 5 remote controllers to one main unit, and each remote controller could be paired to any main unit.

Work Status Indicator - Steady green: Normal working - Single green blink: Command received - Long single green blink: Mode or color cycle edge - Long single yellow blink: Reach brightness limit - Red flash: Overload protection - Yellow flash: Overheat protection - Green flash 3 times: New remote controller paired

For Single LED Strip Only The N12 single-color LED dimmer is designed to drive constant-voltage LED products in the voltage range of DC5-24V. The main unit works with an RF remote controller, allowing the user to adjust the LED brightness on the remote.

Compact Size with Powerful Connection The main unit has a small, compact size of 87mm*24mm, but with a 10A current output and a 5-24V wide voltage range. It also has full protection functions for safe use.

Dimmable with Remote Control The brightness can be adjusted in 11 levels, with a remote control frequency of 433.92MHz and a remote control distance of over 15M.

Easy Operation Connect the LED fixtures to the terminal. Install the positive LED load cable into the terminal marked with '+' and the negative cable into the terminal marked with '-'. The two positive jacks are connected inside the controller, and so are the negative jacks. Please ensure the LED rated voltage is the same as the power supply, and the maximum load current is lower than the controller's rated current.

Cover Patent Design The patent-designed cover can be easily taken out and pushed back by hand, without the need for a screw, saving time and effort.

High Quality & Safety The product has FCC, CE, and RoHS certifications, ensuring high quality and safety protection.

Friendly After-sales Service A hassle-free, friendly support experience is available via email, phone, or online chat.

product information: